


1:29:17 PM  3/12/2006    Executing "scantitle "counting for 10 seconds""





Setting the scantitle to:

counting for 10 seconds








1:29:17 PM  3/12/2006    Executing "scan preset time 10"


                         Derived from "collect preset time 10"








# scan = 1


# date = 3/12/2006


# time = 1:29:17 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = Several people


# local_contact = me


# scan_title = counting for 10 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     10.000  49740.000 195840.000   2057.000     9.8779  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 1:29:28 PM  3/12/2006   scan completed.





1:29:28 PM  3/12/2006    Executing "scantitle "counting for 20 seconds""





Setting the scantitle to:

counting for 20 seconds








1:29:28 PM  3/12/2006    Executing "scan preset time 20"


                         Derived from "collect preset time 20"








# scan = 2


# date = 3/12/2006


# time = 1:29:28 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 20


# builtin_command = scan preset time 20


# users = Several people


# local_contact = me


# scan_title = counting for 20 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 20.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     20.000 100127.000 391666.000   3990.000     9.9392  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 1:29:48 PM  3/12/2006   scan completed.





1:29:48 PM  3/12/2006    Executing "scantitle "counting for 30 seconds""





Setting the scantitle to:

counting for 30 seconds








1:29:49 PM  3/12/2006    Executing "scan preset time 30"


                         Derived from "collect preset time 30"








# scan = 3


# date = 3/12/2006


# time = 1:29:49 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = Several people


# local_contact = me


# scan_title = counting for 30 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     30.000 149672.000 656224.000   5879.000    10.0461  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 1:30:19 PM  3/12/2006   scan completed.





1:30:19 PM  3/12/2006    Executing "scantitle "counting for 40 seconds""





Setting the scantitle to:

counting for 40 seconds








1:30:19 PM  3/12/2006    Executing "scan preset time 40"


                         Derived from "collect preset time 40"








# scan = 4


# date = 3/12/2006


# time = 1:30:19 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 40


# builtin_command = scan preset time 40


# users = Several people


# local_contact = me


# scan_title = counting for 40 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 40.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     40.000 199901.000 812724.000   8130.000     9.6557  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 1:31:00 PM  3/12/2006   scan completed.





1:31:00 PM  3/12/2006    Executing "scantitle "counting for 50 seconds""





Setting the scantitle to:

counting for 50 seconds








1:31:00 PM  3/12/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 5


# date = 3/12/2006


# time = 1:31:00 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = Several people


# local_contact = me


# scan_title = counting for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     50.000 249952.000 998378.000  10101.000    10.2625  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 1:31:51 PM  3/12/2006   scan completed.





1:50:37 PM  3/12/2006    Executing "scan preset time 180"


                         Derived from "collect preset time 180"








# scan = 6


# date = 3/12/2006


# time = 1:50:37 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 180


# builtin_command = scan preset time 180


# users = Several people


# local_contact = me


# scan_title = counting for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 180.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1    180.000 901634.000 3379294.000  36009.000    10.2754  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 1:53:38 PM  3/12/2006   scan completed.





8:12:04 AM  3/13/2006    Executing "scan preset time 30"


                         Derived from "collect preset time 30"








# scan = 7


# date = 3/13/2006


# time = 8:12:04 AM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = Several people


# local_contact = me


# scan_title = counting for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     30.000 149519.000 538053.000   5970.000    10.0385  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 8:12:36 AM  3/13/2006   scan completed.





8:20:08 AM  3/13/2006    Executing "scan preset time 30"


                         Derived from "collect preset time 30"








# scan = 8


# date = 3/13/2006


# time = 8:20:08 AM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = Several people


# local_contact = me


# scan_title = counting for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     30.000 150349.000 577619.000   6039.000    10.2335  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 8:20:39 AM  3/13/2006   scan completed.





10:49:17 AM  3/13/2006    Executing "scan preset time 30"


                          Derived from "collect preset time 30"








# scan = 9


# date = 3/13/2006


# time = 10:49:17 AM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = Several people


# local_contact = me


# scan_title = counting for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     30.000 150344.000 558399.000   6162.000     9.9461  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 10:49:48 AM  3/13/2006   scan completed.





5:14:08 PM  3/13/2006    Executing "scan preset time 30"


                         Derived from "collect preset time 30"








# scan = 10


# date = 3/13/2006


# time = 5:14:08 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = Several people


# local_contact = me


# scan_title = counting for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     30.000 150130.000 549271.000   5923.000     9.7944  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 5:14:39 PM  3/13/2006   scan completed.





5:17:56 PM  3/13/2006    Executing "scan preset time 90"


                         Derived from "collect preset time 90"








# scan = 1


# date = 3/13/2006


# time = 5:17:56 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 90


# builtin_command = scan preset time 90


# users = Several people


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 90.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     90.000 450091.000 1585943.000  18197.000    10.1752  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 5:19:26 PM  3/13/2006   scan completed.





10:11:21 PM  3/13/2006    Executing "scan preset time 30"


                          Derived from "collect preset time 30"








# scan = 2


# date = 3/13/2006


# time = 10:11:21 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = Several people


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     30.000 151137.000 479705.000   5939.000    10.3148  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 10:11:52 PM  3/13/2006   scan completed.





10:31:29 PM  3/13/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 3


# date = 3/13/2006


# time = 10:31:29 PM


# experiment = Test experiment number 1


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = Several people


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     10.000  49998.000 176404.000   2065.000     9.6659  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 10:31:39 PM  3/13/2006   scan completed.





10:38:01 PM  3/13/2006    Executing "title "Small-angle neutron scattering study of several samples""





Setting the experiment title to:

Small-angle neutron scattering study of several samples








10:38:04 PM  3/13/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 4


# date = 3/13/2006


# time = 10:38:04 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = Several people


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     10.000  50396.000 156463.000   2032.000     9.5939  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 10:38:15 PM  3/13/2006   scan completed.





10:39:03 PM  3/13/2006    Executing "users "M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller""





Setting the users to:

M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller








10:39:07 PM  3/13/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 5


# date = 3/13/2006


# time = 10:39:07 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     10.000  49911.000 166480.000   1916.000     9.6752  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 10:39:18 PM  3/13/2006   scan completed.





10:55:08 PM  3/13/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 6


# date = 3/13/2006


# time = 10:55:08 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     10.000  49892.000 176087.000   2023.000    10.1463  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 10:55:18 PM  3/13/2006   scan completed.





11:09:33 PM  3/13/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 7


# date = 3/13/2006


# time = 11:09:33 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1     10.000  50130.000 176241.000   1952.000    10.0886  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 11:09:44 PM  3/13/2006   scan completed.





11:23:11 PM  3/13/2006    Executing "scan preset time 100"


                          Derived from "collect preset time 100"








# scan = 8


# date = 3/13/2006


# time = 11:23:11 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 100


# builtin_command = scan preset time 100


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 100.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel    nguides sample_aperture     trap_x   dettrans sampdetdist


      1    100.000 500894.000 1743211.000  19964.000     9.8038  1177.3498    -2.3971    14.9964     0.2001     3.0000     9.9993    10.0000    11.9948    34.993


# Footer Info = Add information here


# 11:24:52 PM  3/13/2006   scan completed.





3:44:32 PM  3/14/2006    Executing "drive dlambda%fwhm 0.25"





Driving to the following position: "dlambda%fwhm 0.25"





Destination Motor Positions:

motor        position

selector_tilt      -3.33333


selector_rpm      942.12877





Drive completed.








3:56:23 PM  3/14/2006    Executing "drive lambda 14.97743 dlambda_rel coll_1 20mm coll_2 40mm coll_3 guide coll_4 open coll_5 "open" coll_6 "open" coll_7 "open" coll_8 "open" sampdetdist 34.99362 dettrans 11.99480 sample_aperture"





ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:

drive motor1 value1 motor2 value2 .....Move aborted.








3:57:04 PM  3/14/2006    Executing "drive coll_1 20mm coll_2 40mm coll_3 guide"





Driving to the following position: "coll_1 20mm coll_2 40mm coll_3 guide"





Destination Motor Positions:

motor        position

coll_1      -5.00000


coll_2      12.00000


coll_3      -45.00000





Drive completed.








4:13:41 PM  3/14/2006    Executing "drive lambda 14.97743 dlambda_rel_fwhm 0.25032 coll_1 20mm coll_2 40mm coll_3 guide coll_4 20mm coll_5 open coll_6 open coll_7 open coll_8 open sampdetdist 34.99362 dettrans 11.99480 sample_aperture 34"





ERROR in drive command: Attempting to move "sample_aperture" - this entry is not present in the device list.

..Move aborted.








4:15:25 PM  3/14/2006    Executing "drive lambda 14.99636 dlambda_rel_fwhm 0.20005 coll_1 guide coll_2 guide coll_3 guide coll_4 20mm coll_5 open coll_6 open coll_7 open coll_8 open sampdetdist 34.99362 dettrans 11.99480 sample_ap_trans 34"





Driving to the following position: "lambda 14.99636 dlambda_rel_fwhm 0.20005 coll_1 guide coll_2 guide coll_3 guide coll_4 20mm coll_5 open coll_6 open coll_7 open coll_8 open sampdetdist 34.99362 dettrans 11.99480 sample_ap_trans 34"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -5.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sampdetdist      34.99362


dettrans      11.99480


sample_ap_trans      34.00000


selector_rpm      1177.36644


selector_tilt      -2.39700





Drive completed.








4:15:41 PM  3/14/2006    Executing "drive lambda 14.99862 dlambda_rel_fwhm 0.20002 coll_1 guide coll_2 guide coll_3 guide coll_4 20mm coll_5 open coll_6 open coll_7 open coll_8 open sampdetdist 34.99314 dettrans 11.99564 sample_ap_trans 40mm"





Driving to the following position: "lambda 14.99862 dlambda_rel_fwhm 0.20002 coll_1 guide coll_2 guide coll_3 guide coll_4 20mm coll_5 open coll_6 open coll_7 open coll_8 open sampdetdist 34.99314 dettrans 11.99564 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -5.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sampdetdist      34.99314


dettrans      11.99564


sample_ap_trans      30.00000


selector_rpm      1177.36559


selector_tilt      -2.39630





Drive completed.








4:58:12 PM  3/14/2006    Executing "scan preset time 10"


                         Derived from "collect preset time 10"








# scan = 9


# date = 3/14/2006


# time = 4:58:12 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides sample_ap_trans 20mm_trap_y 40mm_trap_y 60mm_trap_y beam_trap_x detector_trans sample_det_dist


      1     10.000  50287.000 186354.000   2029.000    10.2485  1177.3663    -2.3974    14.9950     0.2001     3.0000    29.9997    10.0000    10.0000    10.0000    10.0000    11.9948    34.993


# Footer Info = Add information here


# 4:58:23 PM  3/14/2006   scan completed.





5:05:31 PM  3/14/2006    Executing "scan preset time 10"


                         Derived from "collect preset time 10"








# scan = 10


# date = 3/14/2006


# time = 5:05:31 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides sample_ap_trans beam_trap_x detector_trans sample_det_dist trap_100mm_y trap_200mm_y trap_40mm_y


      1     10.000  50370.000 225344.000   1947.000    10.2047  1177.3663    -2.3974    14.9950     0.2001     3.0000    29.9997    10.0000    11.9948    34.9936    10.0000    10.0000    10.000


# Footer Info = Add information here


# 5:05:42 PM  3/14/2006   scan completed.





5:08:04 PM  3/14/2006    Executing "scan preset time 10"


                         Derived from "collect preset time 10"








# scan = 11


# date = 3/14/2006


# time = 5:08:04 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = This is the first scan title


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides sample_ap_trans beam_trap_x detector_trans sample_det_dist trap_100mm_y trap_200mm_y trap_40mm_y


      1     10.000  50029.000 205568.000   2025.000    10.2014  1177.3663    -2.3974    14.9950     0.2001     3.0000    29.9997    10.0000    11.9948    34.9936    10.0000    10.0000    10.000


# Footer Info = Add information here


# 5:08:15 PM  3/14/2006   scan completed.





11:52:54 PM  3/14/2006    Executing "drive beam_trap_size 50"





Driving to the following position: "beam_trap_size 50"





Destination Motor Positions:

motor        position




Drive completed.








11:53:01 PM  3/14/2006    Executing "drive beam_trap_size 100"





Driving to the following position: "beam_trap_size 100"





Destination Motor Positions:

motor        position

beam_trap_x      0.00000


trap_y_40mm      0.00000


trap_y_100mm      510.00000


trap_y_200mm      0.00000





Drive aborted!!



Final Motor Positions:

motor        position

beam_trap_x      -0.00081


trap_y_40mm      -0.00055


trap_y_100mm      297.89600


trap_y_200mm      -0.00006







Abort issued!!




11:54:38 PM  3/14/2006    Executing "drive beam_trap_size 100"





Driving to the following position: "beam_trap_size 100"





Destination Motor Positions:

motor        position

beam_trap_x      0.00000


trap_y_40mm      0.00000


trap_y_100mm      510.00000


trap_y_200mm      0.00000





Drive completed.








11:56:33 PM  3/14/2006    Executing "drive beam_trap_size 200"





Driving to the following position: "beam_trap_size 200"





Destination Motor Positions:

motor        position

beam_trap_x      0.00000


trap_y_40mm      0.00000


trap_y_100mm      0.00000


trap_y_200mm      510.00000





Drive completed.








11:56:43 PM  3/14/2006    Executing "drive beam_trap_size 100"





Driving to the following position: "beam_trap_size 100"





Destination Motor Positions:

motor        position

beam_trap_x      0.00000


trap_y_40mm      0.00000


trap_y_100mm      510.00000


trap_y_200mm      0.00000





Drive completed.








12:10:50 AM  3/15/2006    Executing "scantitle "Test data collection for 10s""





Setting the scantitle to:

Test data collection for 10s








12:10:55 AM  3/15/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 1


# date = 3/15/2006


# time = 12:10:55 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 10s


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     10.000  50187.000 166601.000   1960.000    10.4861  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:11:06 AM  3/15/2006   scan completed.





12:11:14 AM  3/15/2006    Executing "scantitle "Test data collection for 20s""





Setting the scantitle to:

Test data collection for 20s








12:11:18 AM  3/15/2006    Executing "scan preset time 20"


                          Derived from "collect preset time 20"








# scan = 2


# date = 3/15/2006


# time = 12:11:18 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 20


# builtin_command = scan preset time 20


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 20s


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 20.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     20.000 100044.000 381545.000   3969.000    10.4723  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:11:39 AM  3/15/2006   scan completed.





12:11:39 AM  3/15/2006    Executing "scantitle "Test data collection for 30s""





Setting the scantitle to:

Test data collection for 30s








12:11:39 AM  3/15/2006    Executing "scan preset time 30"


                          Derived from "collect preset time 30"








# scan = 3


# date = 3/15/2006


# time = 12:11:39 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 30s


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     30.000 149941.000 469739.000   6135.000     9.6160  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:12:10 AM  3/15/2006   scan completed.





12:12:10 AM  3/15/2006    Executing "scantitle "Test data collection for 40s""





Setting the scantitle to:

Test data collection for 40s








12:12:10 AM  3/15/2006    Executing "scan preset time 40"


                          Derived from "collect preset time 40"








# scan = 4


# date = 3/15/2006


# time = 12:12:10 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 40


# builtin_command = scan preset time 40


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 40s


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 40.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     40.000 199975.000 725930.000   8056.000     9.8507  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:12:51 AM  3/15/2006   scan completed.





12:18:11 AM  3/15/2006    Executing "scantitle "Test data collection for 10 seconds""





Setting the scantitle to:

Test data collection for 10 seconds








12:18:11 AM  3/15/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 5


# date = 3/15/2006


# time = 12:18:11 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 10 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     10.000  49996.000 186175.000   2038.000     9.7997  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:18:22 AM  3/15/2006   scan completed.





12:18:22 AM  3/15/2006    Executing "scantitle "Test data collection for 20 seconds""





Setting the scantitle to:

Test data collection for 20 seconds








12:18:22 AM  3/15/2006    Executing "scan preset time 20"


                          Derived from "collect preset time 20"








# scan = 6


# date = 3/15/2006


# time = 12:18:22 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 20


# builtin_command = scan preset time 20


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 20 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 20.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     20.000 100453.000 362299.000   3973.000     9.9904  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:18:43 AM  3/15/2006   scan completed.





12:18:43 AM  3/15/2006    Executing "scantitle "Test data collection for 30 seconds""





Setting the scantitle to:

Test data collection for 30 seconds








12:18:43 AM  3/15/2006    Executing "scan preset time 30"


                          Derived from "collect preset time 30"








# scan = 7


# date = 3/15/2006


# time = 12:18:43 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 30 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     17.094  85491.000 342644.000   3453.000    10.0371  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:19:02 AM  3/15/2006   scan stopped!!




Abort issued!!




12:19:47 AM  3/15/2006    Executing "scantitle "Test data collection for 10 seconds""





Setting the scantitle to:

Test data collection for 10 seconds








12:19:48 AM  3/15/2006    Executing "scan preset time 10"


                          Derived from "collect preset time 10"








# scan = 1


# date = 3/15/2006


# time = 12:19:48 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 10


# builtin_command = scan preset time 10


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 10 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 10.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     10.000  50465.000 195590.000   1982.000     9.8013  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:19:58 AM  3/15/2006   scan completed.





12:19:58 AM  3/15/2006    Executing "scantitle "Test data collection for 20 seconds""





Setting the scantitle to:

Test data collection for 20 seconds








12:19:58 AM  3/15/2006    Executing "scan preset time 20"


                          Derived from "collect preset time 20"








# scan = 2


# date = 3/15/2006


# time = 12:19:58 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 20


# builtin_command = scan preset time 20


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 20 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 20.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     20.000  99936.000 342923.000   4105.000     9.6863  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:20:19 AM  3/15/2006   scan completed.





12:20:19 AM  3/15/2006    Executing "scantitle "Test data collection for 30 seconds""





Setting the scantitle to:

Test data collection for 30 seconds








12:20:19 AM  3/15/2006    Executing "scan preset time 30"


                          Derived from "collect preset time 30"








# scan = 3


# date = 3/15/2006


# time = 12:20:19 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 30


# builtin_command = scan preset time 30


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 30 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 30.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     30.000 150227.000 498997.000   6050.000    10.3416  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:20:50 AM  3/15/2006   scan completed.





12:20:50 AM  3/15/2006    Executing "scantitle "Test data collection for 40 seconds""





Setting the scantitle to:

Test data collection for 40 seconds








12:20:50 AM  3/15/2006    Executing "scan preset time 40"


                          Derived from "collect preset time 40"








# scan = 4


# date = 3/15/2006


# time = 12:20:50 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 40


# builtin_command = scan preset time 40


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 40 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 40.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     40.000 199854.000 675176.000   7982.000    10.0786  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:21:31 AM  3/15/2006   scan completed.





12:21:31 AM  3/15/2006    Executing "scantitle "Test data collection for 50 seconds""





Setting the scantitle to:

Test data collection for 50 seconds








12:21:31 AM  3/15/2006    Executing "scan preset time 50"


                          Derived from "collect preset time 50"








# scan = 5


# date = 3/15/2006


# time = 12:21:31 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     50.000 250255.000 793124.000  10014.000    10.3480  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:22:22 AM  3/15/2006   scan completed.





10:23:22 AM  3/22/2006    Executing "scan preset time 50"


                          Derived from "collect preset time 50"








# scan = 6


# date = 3/22/2006


# time = 10:23:22 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


# Footer Info = Add information here


# 10:23:22 AM  3/22/2006   scan stopped!!




Abort issued!!




10:23:28 AM  3/22/2006    Executing "scan preset time 50"


                          Derived from "collect preset time 50"








# scan = 7


# date = 3/22/2006


# time = 10:23:28 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     50.000 249570.000 959594.000   9990.000    10.3508  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 10:24:20 AM  3/22/2006   scan completed.





12:06:25 PM  4/5/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 8


# date = 4/5/2006


# time = 12:06:25 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     39.277 196438.000 792816.000   7777.000     9.8814  1177.3663    -2.3974    14.9950     0.2001     3.0000     0.0000    29.9997    10.0000    -0.0000    11.9948   100.0000    34.9936   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 12:07:06 PM  4/5/2006   scan stopped!!




Abort issued!!




10:32:22 AM  4/26/2006    Executing "drive lambda 15.01166 dlambda_rel_fwhm 0.19986 coll_1 20mm coll_2 guide coll_3 guide coll_4 20mm coll_5 open coll_6 20mm coll_7 open coll_8 open sample_det_dist 5 detector_trans 4.99885 sample_ap_trans 50mm"





Driving to the following position: "lambda 15.01166 dlambda_rel_fwhm 0.19986 coll_1 20mm coll_2 guide coll_3 guide coll_4 20mm coll_5 open coll_6 20mm coll_7 open coll_8 open sample_det_dist 5 detector_trans 4.99885 sample_ap_trans 50mm"





Destination Motor Positions:

motor        position

coll_1      -5.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -5.00000


coll_5      0.00000


coll_6      -5.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      5.00000


detector_trans      4.99885


sample_ap_trans      40.00000


selector_rpm      1177.28460


selector_tilt      -2.39255





Drive completed.








10:33:07 AM  4/26/2006    Executing "scan preset time 50"


                          Derived from "collect preset time 50"








# scan = 9


# date = 4/26/2006


# time = 10:33:07 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     50.000 250838.000 802507.000  10239.000     9.9031  1177.2831    -2.3944    15.0058     0.1999     0.0000     0.0000    39.9997    10.0000    -0.0000     5.0028   100.0000     5.0008   510.0000    -0.0001     0.000


# Footer Info = Add information here


# 10:33:58 AM  4/26/2006   scan completed.





9:57:22 AM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 10


# date = 4/27/2006


# time = 9:57:22 AM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1      0.000      0.000      0.000      0.000    10.2497     0.0000     0.0000        Inf     0.1324     0.0000     0.0000     0.0000     0.0000     0.0000     0.0000    -1.0000     0.0000     0.0000     0.0000     0.000


# Footer Info = Add information here


# 9:57:25 AM  4/27/2006   scan completed.





2:56:55 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 11


# date = 4/27/2006


# time = 2:56:55 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1      0.000      0.000      0.000      0.000     9.9414     0.0000     0.0000        Inf     0.1324     0.0000     0.0000     0.0000     0.0000     0.0000     0.0000    -1.0000     0.0000     0.0000     0.0000     0.000


# Footer Info = Add information here


# 2:56:57 PM  4/27/2006   scan completed.





2:57:21 PM  4/27/2006    Executing "drive lambda inf dlambda_rel_fwhm 0.13235 coll_1 guide coll_2 open coll_3 open coll_4 open coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 0.00000 detector_trans 0.00000 sample_ap_trans 10mm"





Driving to the following position: "lambda inf dlambda_rel_fwhm 0.13235 coll_1 guide coll_2 open coll_3 open coll_4 open coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 0.00000 detector_trans 0.00000 sample_ap_trans 10mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      0.00000


coll_3      0.00000


coll_4      0.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      0.00000


detector_trans      0.00000


sample_ap_trans      0.00000


selector_rpm      0.00000


selector_tilt      0.00016





ERROR in drive command...

The destination for "sample_det_dist", 0.00000, is below the lower limit of 5.00000.

The destination for "selector_rpm", 0.00000, is below the lower limit of 1.10000.

..Move aborted.





Drive completed.








2:57:30 PM  4/27/2006    Executing "drive lambda inf dlambda_rel_fwhm 0.13235 coll_1 40mm coll_2 open coll_3 open coll_4 open coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 0.00000 detector_trans 0.00000 sample_ap_trans 10mm"





Driving to the following position: "lambda inf dlambda_rel_fwhm 0.13235 coll_1 40mm coll_2 open coll_3 open coll_4 open coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 0.00000 detector_trans 0.00000 sample_ap_trans 10mm"





Destination Motor Positions:

motor        position

coll_1      12.00000


coll_2      0.00000


coll_3      0.00000


coll_4      0.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      0.00000


detector_trans      0.00000


sample_ap_trans      0.00000


selector_rpm      0.00000


selector_tilt      0.00016





ERROR in drive command...

The destination for "sample_det_dist", 0.00000, is below the lower limit of 5.00000.

The destination for "selector_rpm", 0.00000, is below the lower limit of 1.10000.

..Move aborted.





Drive completed.








3:29:26 PM  4/27/2006    Executing "drive lambda 10"





Driving to the following position: "lambda 10"





Destination Motor Positions:

motor        position

selector_rpm      2668.71667





Drive completed.








3:29:56 PM  4/27/2006    Executing "drive selector_tilt 2"





Driving to the following position: "selector_tilt 2"





Destination Motor Positions:

motor        position

selector_tilt      2.00000





Drive completed.








3:30:25 PM  4/27/2006    Executing "drive lambda 12.82222 dlambda_rel_fwhm 0.10322 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 20mm coll_6 open coll_7 open coll_8 open sample_det_dist 0.00000 detector_trans 0.00000 sample_ap_trans 10mm"





Driving to the following position: "lambda 12.82222 dlambda_rel_fwhm 0.10322 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 20mm coll_6 open coll_7 open coll_8 open sample_det_dist 0.00000 detector_trans 0.00000 sample_ap_trans 10mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -45.00000


coll_5      -5.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      0.00000


detector_trans      0.00000


sample_ap_trans      0.00000


selector_rpm      2668.75672


selector_tilt      1.99921





ERROR in drive command...

The destination for "sample_det_dist", 0.00000, is below the lower limit of 5.00000.

..Move aborted.





Drive completed.








3:30:45 PM  4/27/2006    Executing "drive coll_1 guide coll_2 guide"





Driving to the following position: "coll_1 guide coll_2 guide"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000





Drive completed.








3:31:22 PM  4/27/2006    Executing "drive lambda 12.82222 dlambda_rel_fwhm 0.10322 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 guide coll_6 20mm coll_7 open coll_8 open sample_det_dist 15 detector_trans 5 sample_ap_trans 30mm"





Driving to the following position: "lambda 12.82222 dlambda_rel_fwhm 0.10322 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 guide coll_6 20mm coll_7 open coll_8 open sample_det_dist 15 detector_trans 5 sample_ap_trans 30mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -45.00000


coll_5      -45.00000


coll_6      -5.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      15.00000


detector_trans      5.00000


sample_ap_trans      20.00000


selector_rpm      2668.75672


selector_tilt      1.99921





Drive completed.








3:31:55 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 12


# date = 4/27/2006


# time = 3:31:55 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1      0.000      0.000      0.000      0.000    10.0283  2668.7525     1.9980    12.8205     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 3:31:58 PM  4/27/2006   scan completed.





3:35:00 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 13


# date = 4/27/2006


# time = 3:35:00 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1      0.000      0.000      0.000      0.000     9.5742  2668.7525     1.9980    12.8205     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 3:35:31 PM  4/27/2006   scan completed.





3:37:50 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 14


# date = 4/27/2006


# time = 3:37:50 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1      0.000      0.000  19527.000      0.000    10.3689  2668.7525     1.9980    12.8205     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 3:38:26 PM  4/27/2006   scan completed.





3:41:34 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 15


# date = 4/27/2006


# time = 3:41:34 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     29.703 148545.000 528836.000   5897.000     9.8592  2668.7525     1.9980    12.8205     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 3:42:05 PM  4/27/2006   scan stopped!!




Abort issued!!




4:44:58 PM  4/27/2006    Executing "comment "Hello""





COMMENT:


Hello








5:05:08 PM  4/27/2006    Executing "comment "Hello""





COMMENT:


Hello








5:05:14 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 16


# date = 4/27/2006


# time = 5:05:14 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1      5.848  29150.000  97732.000   1200.000     9.6653  2668.7525     1.9980    12.8205     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 5:05:20 PM  4/27/2006   scan stopped!!




Abort issued!!




5:10:47 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 17


# date = 4/27/2006


# time = 5:10:47 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     31.685 158428.000 460161.000   6331.000    10.0735  2668.7525     1.9980    12.8205     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 5:11:20 PM  4/27/2006   scan stopped!!




Abort issued!!




5:11:29 PM  4/27/2006    Executing "drive lambda 15"





Driving to the following position: "lambda 15"





Destination Motor Positions:

motor        position

selector_rpm      2280.98198





Drive completed.








5:11:46 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 18


# date = 4/27/2006


# time = 5:11:46 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     12.078  60694.000 166177.000   2477.000    10.2822  2280.9910     1.9980    14.9999     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 5:12:16 PM  4/27/2006   scan stopped!!




Abort issued!!




5:13:04 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 19


# date = 4/27/2006


# time = 5:13:04 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     11.497  57516.000 205724.000   2375.000     9.8792  2280.9910     1.9980    14.9999     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 5:13:23 PM  4/27/2006   scan stopped!!




Abort issued!!




5:25:22 PM  4/27/2006    Executing "scan preset time 50"


                         Derived from "collect preset time 50"








# scan = 20


# date = 4/27/2006


# time = 5:25:22 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 50


# builtin_command = scan preset time 50


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 50.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     18.747  93654.000 313249.000   3762.000     9.7662  2280.9910     1.9980    14.9999     0.1032     5.0000     0.0000    20.0003     0.0000     0.0000     4.9983    -1.0000    14.9983     0.0000     0.0000     0.000


# Footer Info = Add information here


# 5:25:41 PM  4/27/2006   scan stopped!!




Abort issued!!




4:58:17 PM  5/4/2006    Executing "drive lambda 14.99994 dlambda_rel_fwhm 0.10323 coll_1 guide coll_2 guide coll_3 open coll_4 guide coll_5 guide coll_6 20mm coll_7 open coll_8 open sample_det_dist 14.99830 detector_trans 4.99829 sample_ap_trans 30mm"





Driving to the following position: "lambda 14.99994 dlambda_rel_fwhm 0.10323 coll_1 guide coll_2 guide coll_3 open coll_4 guide coll_5 guide coll_6 20mm coll_7 open coll_8 open sample_det_dist 14.99830 detector_trans 4.99829 sample_ap_trans 30mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      0.00000


coll_4      -45.00000


coll_5      -45.00000


coll_6      -5.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99830


detector_trans      4.99829


sample_ap_trans      20.00000


selector_rpm      2281.08052


selector_tilt      1.99833





Drive completed.








4:58:31 PM  5/4/2006    Executing "drive lambda 14.99887 dlambda_rel_fwhm 0.10324 coll_1 guide coll_2 guide coll_3 open coll_4 guide coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99713 detector_trans 4.99655 sample_ap_trans 30mm"





Driving to the following position: "lambda 14.99887 dlambda_rel_fwhm 0.10324 coll_1 guide coll_2 guide coll_3 open coll_4 guide coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99713 detector_trans 4.99655 sample_ap_trans 30mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      0.00000


coll_4      -45.00000


coll_5      -45.00000


coll_6      12.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99713


detector_trans      4.99655


sample_ap_trans      20.00000


selector_rpm      2281.02228


selector_tilt      1.99745





Drive completed.








6:05:55 PM  5/4/2006    Executing "drive lambda 14.99922 dlambda_rel_fwhm 0.10324 coll_1 40mm coll_2 guide coll_3 open coll_4 guide coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99743 detector_trans 4.99649 sample_ap_trans 30mm"





Driving to the following position: "lambda 14.99922 dlambda_rel_fwhm 0.10324 coll_1 40mm coll_2 guide coll_3 open coll_4 guide coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99743 detector_trans 4.99649 sample_ap_trans 30mm"





Destination Motor Positions:

motor        position

coll_1      12.00000


coll_2      -45.00000


coll_3      0.00000


coll_4      -45.00000


coll_5      -45.00000


coll_6      12.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99743


detector_trans      4.99649


sample_ap_trans      20.00000


selector_rpm      2280.96906


selector_tilt      1.99745





Drive completed.








6:10:52 PM  5/4/2006    Executing "drive lambda 14.99421 dlambda_rel_fwhm 0.10327 coll_1 20mm coll_2 open coll_3 40mm coll_4 test1 coll_5 test2 coll_6 guide coll_7 guide coll_8 20mm sample_det_dist 14.99873 detector_trans 4.99763 sample_ap_trans 30mm"





ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:

drive motor1 value1 motor2 value2 .....Move aborted.








6:12:41 PM  5/4/2006    Executing "drive lambda 14.99421 dlambda_rel_fwhm 0.10327 coll_1 guide coll_2 guide coll_3 20mm coll_4 40mm coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99873 detector_trans 4.99763 sample_ap_trans 30mm"





Driving to the following position: "lambda 14.99421 dlambda_rel_fwhm 0.10327 coll_1 guide coll_2 guide coll_3 20mm coll_4 40mm coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99873 detector_trans 4.99763 sample_ap_trans 30mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -5.00000


coll_4      12.00000


coll_5      -45.00000


coll_6      12.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99873


detector_trans      4.99763


sample_ap_trans      20.00000


selector_rpm      2281.06835


selector_tilt      1.99481





Drive completed.








6:13:07 PM  5/4/2006    Executing "drive lambda 14.99570 dlambda_rel_fwhm 0.10326 coll_1 guide coll_2 guide coll_3 20mm coll_4 40mm coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99661 detector_trans 5.00027 sample_ap_trans 40mm"





Driving to the following position: "lambda 14.99570 dlambda_rel_fwhm 0.10326 coll_1 guide coll_2 guide coll_3 20mm coll_4 40mm coll_5 guide coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99661 detector_trans 5.00027 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -5.00000


coll_4      12.00000


coll_5      -45.00000


coll_6      12.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99661


detector_trans      5.00027


sample_ap_trans      30.00000


selector_rpm      2281.06258


selector_tilt      1.99569





Drive completed.








6:47:09 PM  5/4/2006    Executing "drive lambda 14.99722 dlambda_rel_fwhm 0.10325 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 40mm coll_6 open coll_7 open coll_8 open sample_det_dist 14.99654 detector_trans 5.00043 sample_ap_trans 40mm"





Driving to the following position: "lambda 14.99722 dlambda_rel_fwhm 0.10325 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 40mm coll_6 open coll_7 open coll_8 open sample_det_dist 14.99654 detector_trans 5.00043 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -45.00000


coll_5      12.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99654


detector_trans      5.00043


sample_ap_trans      30.00000


selector_rpm      2281.05229


selector_tilt      1.99657





Drive completed.








10:02:49 PM  5/4/2006    Executing "drive lambda 14.99929 dlambda_rel_fwhm 0.10324 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 20mm coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99480 detector_trans 4.99581 sample_ap_trans 40mm"





Driving to the following position: "lambda 14.99929 dlambda_rel_fwhm 0.10324 coll_1 guide coll_2 guide coll_3 guide coll_4 guide coll_5 20mm coll_6 40mm coll_7 open coll_8 open sample_det_dist 14.99480 detector_trans 4.99581 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      -45.00000


coll_5      -5.00000


coll_6      12.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.99480


detector_trans      4.99581


sample_ap_trans      30.00000


selector_rpm      2280.95841


selector_tilt      1.99745





Drive completed.








10:05:50 PM  5/4/2006    Executing "drive lambda 15.00241 dlambda_rel_fwhm 0.10322 coll_1 guide coll_2 guide coll_3 guide coll_4 open coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 14.98997 detector_trans 4.99762 sample_ap_trans 40mm"





Driving to the following position: "lambda 15.00241 dlambda_rel_fwhm 0.10322 coll_1 guide coll_2 guide coll_3 guide coll_4 open coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 14.98997 detector_trans 4.99762 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      0.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.98997


detector_trans      4.99762


sample_ap_trans      30.00000


selector_rpm      2280.92592


selector_tilt      1.99921





Drive completed.








10:21:24 PM  5/4/2006    Executing "drive lambda 15.00096 dlambda_rel_fwhm 0.10323 coll_1 guide coll_2 guide coll_3 guide coll_4 40mm coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 14.98691 detector_trans 4.99993 sample_ap_trans 40mm"





Driving to the following position: "lambda 15.00096 dlambda_rel_fwhm 0.10323 coll_1 guide coll_2 guide coll_3 guide coll_4 40mm coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 14.98691 detector_trans 4.99993 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      12.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      14.98691


detector_trans      4.99993


sample_ap_trans      30.00000


selector_rpm      2280.92541


selector_tilt      1.99833





Drive completed.








10:32:44 PM  5/4/2006    Executing "scan preset time 20"


                         Derived from "collect preset time 20"








# scan = 21


# date = 5/4/2006


# time = 10:32:44 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 20


# builtin_command = scan preset time 20


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 20.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     20.000 100647.000 353397.000   4032.000    10.4180  2280.9268     1.9987    15.0016     0.1032     3.0000     0.0000    29.9996     0.0000     0.0000     5.0027    -1.0000    14.9864     0.0000     0.0000     0.000


# Footer Info = Add information here


# 10:33:05 PM  5/4/2006   scan completed.





10:38:59 PM  5/4/2006    Executing "scan preset time 20"


                         Derived from "collect preset time 20"








# scan = 22


# date = 5/4/2006


# time = 10:38:59 PM


# experiment = Small-angle neutron scattering study of several samples


# experiment_number = 1


# command = collect preset time 20


# builtin_command = scan preset time 20


# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller


# local_contact = me


# scan_title = Test data collection for 50 seconds


# samplename = ghkyuikyuhj


# sampletype = crystal


# preset_type = normal 


# preset_channel = time


# preset_value = 20.000000


# def_x = Pt.


# def_y = detector


# col_headers = 


#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm


      1     20.000 100262.000 382589.000   4066.000     9.8702  2280.9268     1.9987    15.0016     0.1032     3.0000     0.0000    29.9996     0.0000     0.0000     5.0027    -1.0000    14.9864     0.0000     0.0000     0.000


# Footer Info = Add information here


# 10:39:19 PM  5/4/2006   scan completed.





12:02:23 PM  5/5/2006    Executing "drive lambda 15.00161 dlambda_rel_fwhm 0.10323 coll_1 guide coll_2 guide coll_3 guide coll_4 40mm coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 25 detector_trans 5.00275 sample_ap_trans 40mm"





Driving to the following position: "lambda 15.00161 dlambda_rel_fwhm 0.10323 coll_1 guide coll_2 guide coll_3 guide coll_4 40mm coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 25 detector_trans 5.00275 sample_ap_trans 40mm"





Destination Motor Positions:

motor        position

coll_1      -45.00000


coll_2      -45.00000


coll_3      -45.00000


coll_4      12.00000


coll_5      0.00000


coll_6      0.00000


coll_7      0.00000


coll_8      0.00000


sample_det_dist      25.00000


detector_trans      5.00275


sample_ap_trans      30.00000


selector_rpm      2280.82659


selector_tilt      1.99833





Drive completed.







10:45:23 AM  5/17/2006    Executing "drive lambda 12 dlambda_rel_fwhm 0.10324 coll_1 guide coll_2 guide coll_3 guide coll_4 40mm coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 24.99815 detector_trans 5.00164 sample_ap_trans 40mm"



Driving to the following position: "lambda 12 dlambda_rel_fwhm 0.10324 coll_1 guide coll_2 guide coll_3 guide coll_4 40mm coll_5 open coll_6 open coll_7 open coll_8 open sample_det_dist 24.99815 detector_trans 5.00164 sample_ap_trans 40mm"



Destination Motor Positions:
motor        position
coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      12.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

sample_det_dist      24.99815

detector_trans      5.00164

sample_ap_trans      30.00000

selector_rpm      2851.06306

selector_tilt      1.99745



Drive completed.





11:08:25 AM  5/17/2006    Executing "drive guides 0"



ERROR in drive command: Attempting to move "guides" - this entry is not present in the device list.
..Move aborted.





11:08:25 AM  5/17/2006    Executing "drive source aperture 5.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:26 AM  5/17/2006    Executing "drive detector distance 600.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:26 AM  5/17/2006    Executing "drive detector offset 10.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:27 AM  5/17/2006    Executing "drive beamtrap 10.000000"



ERROR in drive command: Attempting to move "beamtrap" - this entry is not present in the device list.
..Move aborted.





11:08:27 AM  5/17/2006    Executing "drive beamtrap x 0.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:27 AM  5/17/2006    Executing "drive beamtrap y 0.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:28 AM  5/17/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:08:28 AM  5/17/2006    Executing "drive sample aperture 5.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:28 AM  5/17/2006    Executing "drive wavelength 6.000000"



ERROR in drive command: Attempting to move "wavelength" - this entry is not present in the device list.
..Move aborted.





11:08:28 AM  5/17/2006    Executing "drive wavelength spread 0.100000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:29 AM  5/17/2006    Executing "drive beam center x 0.000000"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





11:08:29 AM  5/17/2006    Executing "drive beam center x 0.000000"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





11:09:05 AM  5/17/2006    Executing "beamcentre 0.000000 0.000000" ... 



Command "beamcentre" not found.



11:22:32 AM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) + 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







11:22:33 AM  5/17/2006    Executing "count preset time 100000"



11:22:33 AM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       35.721   178758.000   342945.000     7144.000



11:23:09 AM  5/17/2006   Count command stopped!!




Abort issued!!


11:23:10 AM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) + 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







11:23:10 AM  5/17/2006    Executing "count preset time 100000"



11:23:10 AM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      157.336   785749.000  1527932.000    31843.000



11:25:49 AM  5/17/2006   Count command stopped!!




Abort issued!!


11:25:49 AM  5/17/2006    Executing "drive beam_trap_x @(beam_trap_x) - 0.010000"



ERROR in drive command: Attempting to move "-" - this entry is not present in the device list.
..Move aborted.





11:25:49 AM  5/17/2006    Executing "count preset time 100000"



11:25:49 AM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       14.311    71466.000   136663.000     2876.000



11:26:05 AM  5/17/2006   Count command stopped!!




Abort issued!!


11:26:05 AM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) + 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







11:26:06 AM  5/17/2006    Executing "count preset time 100000"



11:26:06 AM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       21.681   108931.000   205419.000     4357.000



11:26:29 AM  5/17/2006   Count command stopped!!




Abort issued!!


2:12:18 PM  5/17/2006    Executing "drive nguides 3"



Driving to the following position: "nguides 3"



Destination Motor Positions:
motor        position
coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      -5.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000



Drive completed.





2:12:22 PM  5/17/2006    Executing "drive source aperture 4.000000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





2:12:22 PM  5/17/2006    Executing "drive sample_det_dist 1000.000000"



Driving to the following position: "sample_det_dist 1000.000000"



Destination Motor Positions:
motor        position
sample_det_dist      1000.00000



ERROR in drive command...
The destination for "sample_det_dist", 1000.00000, exceeds the upper limit of 40.00000.
..Move aborted.



Drive completed.





2:12:22 PM  5/17/2006    Executing "drive detector_trans 5.000000"



Driving to the following position: "detector_trans 5.000000"



Destination Motor Positions:
motor        position
detector_trans      5.00000



Drive completed.





2:12:23 PM  5/17/2006    Executing "drive sample_ap_trans 2.000000"



Driving to the following position: "sample_ap_trans 2.000000"



Destination Motor Positions:
motor        position
sample_ap_trans      2.00000



Drive completed.





2:12:31 PM  5/17/2006    Executing "drive lambda 6.000000"



Driving to the following position: "lambda 6.000000"



Destination Motor Positions:
motor        position
selector_rpm      5704.25461



Drive completed.





2:12:50 PM  5/17/2006    Executing "drive dlambda_rel_fwhm 0.120000"



Driving to the following position: "dlambda_rel_fwhm 0.120000"



Destination Motor Positions:
motor        position
selector_tilt      0.72917

selector_rpm      4905.72854



Drive aborted!!

Final Motor Positions:
motor        position
selector_tilt      1.11209

selector_rpm      4905.73138




Abort issued!!


2:21:16 PM  5/17/2006    Executing "drive nguides 3 source aperture 4.000000 sample_det_dist 1000.000000 detector_trans 2.000000 sample_ap_trans 2.000000 lambda 5.000000 dlambda_rel_fwhm 0.120000"



ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.





2:25:20 PM  5/17/2006    Executing "drive nguides 3 sample_det_dist 1000.000000 detector_trans 12.000000 sample_ap_trans 2.000000 lambda 6.000000 dlambda_rel_fwhm 0.120000"



Driving to the following position: "nguides 3 sample_det_dist 1000.000000 detector_trans 12.000000 sample_ap_trans 2.000000 lambda 6.000000 dlambda_rel_fwhm 0.120000"



Destination Motor Positions:
motor        position
sample_det_dist      1000.00000

detector_trans      12.00000

sample_ap_trans      2.00000

coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      -5.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      4905.72917

selector_tilt      0.72917



ERROR in drive command...
The destination for "sample_det_dist", 1000.00000, exceeds the upper limit of 40.00000.
..Move aborted.



Drive completed.





2:26:09 PM  5/17/2006    Executing "drive nguides 3 sample_det_dist 10.000000 detector_trans 12.000000 sample_ap_trans 2.000000 lambda 6.000000 dlambda_rel_fwhm 0.120000"



Driving to the following position: "nguides 3 sample_det_dist 10.000000 detector_trans 12.000000 sample_ap_trans 2.000000 lambda 6.000000 dlambda_rel_fwhm 0.120000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      12.00000

sample_ap_trans      2.00000

coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      -5.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      4905.72917

selector_tilt      0.72917



Drive completed.





3:16:14 PM  5/17/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





3:16:27 PM  5/17/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





3:16:34 PM  5/17/2006    Executing "beamcentre 0.000000 0.000000" ... 



Command "beamcentre" not found.



3:16:43 PM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) + 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







3:16:44 PM  5/17/2006    Executing "count preset time 100000"



3:16:44 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       13.048    65186.000   117276.000     2546.000



3:16:57 PM  5/17/2006   Count command stopped!!




Abort issued!!


3:16:58 PM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) - 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







3:16:58 PM  5/17/2006    Executing "count preset time 100000"



3:16:58 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        9.363    47096.000    88082.000     1862.000



3:17:08 PM  5/17/2006   Count command stopped!!




Abort issued!!


3:17:09 PM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) + 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







3:17:09 PM  5/17/2006    Executing "count preset time 100000"



3:17:09 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       48.220   241203.000   400843.000     9894.000



3:17:58 PM  5/17/2006   Count command stopped!!




Abort issued!!


3:32:26 PM  5/17/2006    Executing "drive nguides 0 sample_det_dist 14.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 14.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      14.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





4:37:49 PM  5/17/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





4:38:03 PM  5/17/2006    Executing "count preset time 100000"



4:38:03 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        6.490    32449.000    68547.000     1322.000



4:38:11 PM  5/17/2006   Count command stopped!!




Abort issued!!


4:38:11 PM  5/17/2006    Executing "drive beam_trap_y @(beam_trap_y) + 0.010000"



Error - the input variable "beam_trap_y" does not have a valid entry in the variable configuration file AND is not a valid motor name.







4:38:12 PM  5/17/2006    Executing "count preset time 100000"



4:38:12 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       12.137    60912.000   137006.000     2309.000



4:38:26 PM  5/17/2006   Count command stopped!!




Abort issued!!


4:38:26 PM  5/17/2006    Executing "drive beam_trap_x @(beam_trap_x) + 0.010000"



ERROR in drive command: Attempting to move "+" - this entry is not present in the device list.
..Move aborted.





4:38:26 PM  5/17/2006    Executing "count preset time 100000"



4:38:26 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       60.006   300198.000   567548.000    11973.000



4:39:28 PM  5/17/2006   Count command stopped!!




Abort issued!!


4:39:35 PM  5/17/2006    Executing "count preset time 100000"



4:39:35 PM  5/17/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        8.161    40775.000    88167.000     1641.000



4:39:44 PM  5/17/2006   Count command stopped!!




Abort issued!!


4:39:44 PM  5/17/2006    Executing "beamtrap_center 96.540000 96.220000" ... 



Command "beamtrap_center" not found.



4:43:43 PM  5/17/2006    Executing "beamcentre 0.000000 0.000000" ... 



Command "beamcentre" not found.



4:43:52 PM  5/17/2006    Executing "beamcentre 0.000000 0.000000" ... 



Command "beamcentre" not found.



9:49:32 PM  5/17/2006    Executing "comment "zero of selector_tilt is @(selector_tilt.zero)""



COMMENT:

zero of selector_tilt is 0





9:49:59 PM  5/17/2006    Executing "comment "upper limit of selector_tilt is @(selector_tilt.upperlimit)""



Error processing: comment "upper limit of selector_tilt is @(selector_tilt.upperlimit)"

Error - the input variable "selector_tilt.upperlimit" does not have a valid entry in the variable configuration file AND is not a valid motor name.





9:50:25 PM  5/17/2006    Executing "comment "upper limit of selector_tilt is @(selector_tilt.ulimit)""



Error processing: comment "upper limit of selector_tilt is @(selector_tilt.ulimit)"

Error in reading the global variable "Motor Upper Limit".





9:51:38 PM  5/17/2006    Executing "comment "upper limit of selector_tilt is @(selector_tilt.ulimit)""



COMMENT:

upper limit of selector_tilt is 4





9:51:51 PM  5/17/2006    Executing "comment "lower limit of selector_tilt is @(selector_tilt.llimit)""



COMMENT:

lower limit of selector_tilt is -4





2:09:14 PM  5/18/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.100000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.100000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.10000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





2:09:22 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





2:09:25 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





2:09:25 PM  5/18/2006    Executing "count preset time 100000"



2:09:25 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       58.474   292613.000   549002.000    11686.000



2:10:27 PM  5/18/2006   Count command stopped!!




Abort issued!!


2:12:40 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





2:12:40 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





2:12:40 PM  5/18/2006    Executing "count preset time 100000"



2:12:40 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       12.769    63693.000   117322.000     2607.000



2:12:54 PM  5/18/2006   Count command stopped!!




Abort issued!!


2:16:44 PM  5/18/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





2:16:48 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





2:16:49 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





2:16:49 PM  5/18/2006    Executing "count preset time 100000"



2:16:49 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       63.000   315412.000   528715.000    12686.000



2:17:53 PM  5/18/2006   Count command stopped!!




Abort issued!!


2:17:54 PM  5/18/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      5886.87500

selector_tilt      2.29167



Drive completed.





2:17:56 PM  5/18/2006    Executing "beamcentre 96.950849 96.929067" ... 



Command "beamcentre" not found.



2:18:09 PM  5/18/2006    Executing "count preset time 100000"



2:18:09 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        2.884    14532.000    38968.000      558.000



2:18:13 PM  5/18/2006   Count command stopped!!




Abort issued!!


2:18:13 PM  5/18/2006    Executing "beamtrap_center 96.540000 96.220000" ... 



Command "beamtrap_center" not found.



4:04:08 PM  5/18/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





4:04:54 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:04:54 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:04:54 PM  5/18/2006    Executing "count preset time 100000"



4:04:54 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        3.766    18784.000    68596.000      794.000



4:04:59 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:05:07 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:05:08 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:05:08 PM  5/18/2006    Executing "count preset time 100000"



4:05:08 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       12.468    62026.000   235033.000     2492.000



4:05:21 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:05:21 PM  5/18/2006    Executing "beamcentre 96.725563 96.963450" ... 



Command "beamcentre" not found.



4:05:21 PM  5/18/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





4:05:24 PM  5/18/2006    Executing "count preset time 100000"



4:05:24 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        8.683    43359.000   156310.000     1729.000



4:05:33 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:05:39 PM  5/18/2006    Executing "count preset time 100000"



4:05:39 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        1.783     9068.000    39273.000      355.000



4:05:41 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:05:41 PM  5/18/2006    Executing "beamtrap_center 96.540000 96.220000" ... 



Command "beamtrap_center" not found.



4:35:18 PM  5/18/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





4:35:18 PM  5/18/2006    Executing "beamcentre 9797" ... 



Command "beamcentre" not found.



4:35:19 PM  5/18/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





4:35:19 PM  5/18/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





4:35:55 PM  5/18/2006    Executing "count preset time 100000"



4:35:55 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        3.374    16854.000    78026.000      678.000



4:35:59 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:36:01 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:36:02 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:36:02 PM  5/18/2006    Executing "count preset time 100000"



4:36:02 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       10.946    54836.000   234586.000     2183.000



4:36:13 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:40:04 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:40:05 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:40:05 PM  5/18/2006    Executing "count preset time 100000"



4:40:05 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       78.342   391534.000  1536297.000    15670.000



4:41:24 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:43:34 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:43:34 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:43:34 PM  5/18/2006    Executing "count preset time 100000"



4:43:34 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       51.965   259486.000  1035450.000    10311.000



4:44:28 PM  5/18/2006   Count command stopped!!




Abort issued!!


4:44:49 PM  5/18/2006    Executing "count preset time 100000"



4:44:49 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       61.058   305667.000        0.000    12100.000



4:45:51 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:19:26 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:19:27 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:19:27 PM  5/18/2006    Executing "count preset time 100000"



9:19:27 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      137.077   684303.000  2688028.000    27390.000



9:21:46 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:25:36 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:25:37 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:25:37 PM  5/18/2006    Executing "count preset time 100000"



9:25:37 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      122.566   613534.000  2379097.000    24676.000



9:27:41 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:32:06 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:32:06 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:32:07 PM  5/18/2006    Executing "count preset time 100000"



9:32:07 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      204.174  1020566.000  3955822.000    41075.000



9:35:32 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:39:47 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:39:47 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:39:47 PM  5/18/2006    Executing "count preset time 100000"



9:39:47 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      167.220   837169.000  3335199.000    33207.000



9:42:35 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:46:13 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:46:13 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:46:13 PM  5/18/2006    Executing "count preset time 100000"



9:46:13 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       33.378   166674.000   617288.000     6763.000



9:46:48 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:48:41 PM  5/18/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:48:41 PM  5/18/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:48:41 PM  5/18/2006    Executing "count preset time 100000"



9:48:41 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       86.535   432661.000  1651274.000    17487.000



9:50:09 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:56:28 PM  5/18/2006    Executing "count preset time 100000"



9:56:28 PM  5/18/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       43.122   215184.000   826400.000     8679.000



9:57:12 PM  5/18/2006   Count command stopped!!




Abort issued!!


9:34:08 AM  5/19/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:34:09 AM  5/19/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:34:09 AM  5/19/2006    Executing "count preset time 100000"



9:34:09 AM  5/19/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      244.922  1225800.000  4230505.000    49076.000



9:38:14 AM  5/19/2006   Count command stopped!!




Abort issued!!


9:38:14 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





9:38:15 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



9:38:15 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





9:38:15 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





9:38:15 AM  5/19/2006    Executing "beamcentre 50.005195 92.141516" ... 



Command "beamcentre" not found.



9:38:18 AM  5/19/2006    Executing "count preset time 100000"



9:38:18 AM  5/19/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      139.962   700465.000  2746918.000    27795.000



9:40:38 AM  5/19/2006   Count command stopped!!




Abort issued!!


9:40:38 AM  5/19/2006    Executing "beamtrap_center 96.540000 96.220000" ... 



Command "beamtrap_center" not found.



9:51:10 AM  5/19/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:51:11 AM  5/19/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





9:51:11 AM  5/19/2006    Executing "count preset time 100000"



9:51:11 AM  5/19/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       18.887    94274.000   348422.000     3756.000



9:51:30 AM  5/19/2006   Count command stopped!!




Abort issued!!


9:51:31 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 16.000000 detector_trans 0.010000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.150000"



Driving to the following position: "nguides 0 sample_det_dist 16.000000 detector_trans 0.010000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.150000"



Destination Motor Positions:
motor        position
sample_det_dist      16.00000

detector_trans      0.01000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      2354.75000

selector_tilt      -0.83333



Drive aborted!!

Final Motor Positions:
motor        position
sample_det_dist      16.00216

detector_trans      0.01116

sample_ap_trans      39.99978

coll_1      -4.99883

coll_2      -0.00115

coll_3      0.00117

coll_4      -0.00304

coll_5      0.00200

coll_6      -0.00075

coll_7      0.00246

coll_8      -0.00183

selector_rpm      3131.02544

selector_tilt      1.62633




Abort issued!!


9:51:34 AM  5/19/2006    Executing "count preset time 100000"



9:51:34 AM  5/19/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        2.584    12800.000    59593.000      519.000



9:51:37 AM  5/19/2006   Count command stopped!!




Abort issued!!


9:51:37 AM  5/19/2006    Executing "beamtrap_center 96.540000 96.220000" ... 



Command "beamtrap_center" not found.



10:06:56 AM  5/19/2006    Executing "scan preset time 60"

                          Derived from "collect preset time 60"





# scan = 23

# date = 5/19/2006

# time = 10:06:56 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 60

# builtin_command = scan preset time 60

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 60.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm



10:17:01 AM  5/19/2006    Executing "scan preset time 60"

                          Derived from "collect preset time 60"





# scan = 24

# date = 5/19/2006

# time = 10:17:01 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 60

# builtin_command = scan preset time 60

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 60.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1      5.298  26430.000 119283.000   1069.000     9.9511  3131.0254     1.6263    10.4804     0.1076     0.0000     0.0000    39.9998    10.0008    96.5408     0.0112    -1.0000    16.0022     0.0000     0.0000     0.000

# Footer Info = Add information here

# 10:17:07 AM  5/19/2006   scan stopped!!


Abort issued!!


11:17:38 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:38 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:17:38 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:17:38 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:17:40 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:40 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:40 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:41 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:41 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:44 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:44 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:44 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:45 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:45 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:45 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:46 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:46 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:46 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:47 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:47 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:47 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:48 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:48 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:48 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:49 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:49 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:49 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:49 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:50 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:50 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:51 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:51 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:51 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:51 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:52 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:52 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:52 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:53 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:53 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:53 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:53 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:54 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:54 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:54 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:55 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:55 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:55 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:56 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:56 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:56 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:57 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:57 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:57 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:17:57 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:17:58 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:17:58 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:58 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:17:59 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:17:59 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:17:59 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:00 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:00 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:00 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:01 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:01 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:01 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:02 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:02 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:02 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:03 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:03 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:03 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:06 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:06 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:06 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:07 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:07 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:07 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:08 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:08 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:08 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:08 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:09 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:09 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:09 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:10 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:10 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:10 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:11 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:11 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:11 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:12 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:12 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:12 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:13 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:13 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:13 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:13 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:14 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:14 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:15 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:15 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:15 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:15 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:16 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:16 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:16 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:17 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:17 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:18 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:18 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:18 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:19 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:19 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:19 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:19 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:20 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:20 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:20 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:21 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:21 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:21 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:22 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:22 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:22 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:22 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:23 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:23 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive aborted!!

Final Motor Positions:
motor        position
sample_det_dist      15.00040

detector_trans      -0.00233

sample_ap_trans      40.00021

coll_1      -5.00345

coll_2      -0.00155

coll_3      -0.00215

coll_4      -0.00031

coll_5      0.00357

coll_6      0.00184

coll_7      -0.00437

coll_8      -0.00018

selector_rpm      3532.12395

selector_tilt      2.29408




Abort issued!!


11:18:24 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:24 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:25 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:25 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:26 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:26 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:27 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.




Abort issued!!


11:18:27 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:28 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:28 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:28 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.




Abort issued!!


11:18:28 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:29 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:29 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:30 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:30 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:30 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:31 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:31 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:31 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:32 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:32 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:32 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:33 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:33 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:33 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:34 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:34 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:34 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:35 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:35 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:35 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:35 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:36 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:36 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:37 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:37 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:37 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:38 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:38 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:38 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:39 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:39 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:39 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:40 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:40 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:40 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:41 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:41 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:41 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:42 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:42 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:42 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:43 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:18:43 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:18:43 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:18:44 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:18:44 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:18:44 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:45 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:45 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive aborted!!

Final Motor Positions:
motor        position
sample_det_dist      14.99770

detector_trans      0.00075

sample_ap_trans      39.99952

coll_1      -5.00093

coll_2      0.00124

coll_3      0.00305

coll_4      -0.00067

coll_5      0.00118

coll_6      -0.00224

coll_7      0.00467

coll_8      -0.00174

selector_rpm      3532.13105

selector_tilt      2.29263




Abort issued!!


11:18:47 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:18:48 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:17 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:17 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:28:18 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:28:18 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:28:18 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:19 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:19 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:19 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:19 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:20 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:20 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:20 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:21 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:21 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:21 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:22 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:22 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:22 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:23 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:23 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:24 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:24 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:24 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:25 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:25 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:25 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:26 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:26 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:27 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:27 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:27 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:28 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:28 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:28 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:29 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:29 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:29 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:29 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:30 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:30 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:30 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:31 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:31 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:31 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:32 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:32 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:32 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:33 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:33 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:33 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:34 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:34 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:35 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:35 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:35 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:35 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:36 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:36 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:37 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:37 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:37 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:38 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:38 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:38 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:39 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:39 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:40 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:40 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:40 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:40 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:41 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:41 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:42 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:42 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:42 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:43 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:43 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:43 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:28:43 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:28:44 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:28:44 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:28:45 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:28:45 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:28:47 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.




Abort issued!!


11:28:48 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:13 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:13 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:35:14 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:35:14 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:35:14 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:15 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:15 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:15 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:16 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:16 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:16 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:17 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:17 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:17 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:18 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:18 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:18 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:19 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:19 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:19 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:20 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:20 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:20 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:21 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:22 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:22 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:22 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:23 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:23 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:23 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:24 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:24 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:24 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:25 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:25 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:25 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:25 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:26 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:27 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:27 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:27 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:27 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:28 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:28 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:29 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:29 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:29 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:30 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:30 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:30 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:31 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:32 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:32 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:32 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:33 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:33 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:33 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:34 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:34 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:34 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:35 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:35 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:35 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:36 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:36 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:35:37 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:35:37 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:35:37 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:35:38 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:35:38 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:38 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:35:39 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive aborted!!

Final Motor Positions:
motor        position
sample_det_dist      14.99953

detector_trans      0.00224

sample_ap_trans      40.00112

coll_1      -4.99999

coll_2      -0.00010

coll_3      -0.00243

coll_4      0.00058

coll_5      0.00361

coll_6      -0.00052

coll_7      -0.00209

coll_8      -0.00315

selector_rpm      3532.12263

selector_tilt      2.28881




Abort issued!!


11:39:18 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:18 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:39:18 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:39:18 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:39:19 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:39:19 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:39:20 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:45 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:45 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:39:45 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:39:45 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:39:46 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:39:46 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:39:46 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:47 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:47 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:39:47 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:39:47 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:39:48 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:39:48 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:39:49 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:56 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:56 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:39:56 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:39:56 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:39:57 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:39:57 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:39:57 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:58 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:39:58 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:39:59 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:39:59 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:39:59 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:40:00 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:40:00 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:40:00 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:40:00 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:40:01 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:40:02 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:40:02 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:40:02 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:40:03 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:40:03 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:40:03 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:40:03 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167





11:55:48 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:48 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:55:49 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:55:49 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:55:49 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:55:50 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:55:50 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:55:50 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:51 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:51 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:55:51 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:55:52 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:55:52 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:55:52 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:55:52 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:55:53 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:53 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:53 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:55:54 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:55:54 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:55:54 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:55:55 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:55:55 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:55:55 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:56 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:56 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:55:57 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:55:57 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:55:57 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:55:57 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:55:58 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:55:58 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:58 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:55:59 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:55:59 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:55:59 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:55:59 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:00 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:00 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:00 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:01 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:01 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:01 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:02 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:02 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:02 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:02 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:03 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:03 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:03 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:04 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:04 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:04 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:05 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:05 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:05 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:06 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:06 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:06 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:07 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:07 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:07 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:07 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:08 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:08 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:08 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:09 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:09 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:09 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:09 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:10 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:10 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:10 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:11 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:11 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:11 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:12 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:12 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:12 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:13 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:13 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:13 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:14 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:14 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:14 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:14 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:15 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:15 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:27 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:27 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





11:56:27 AM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



11:56:27 AM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





11:56:28 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:28 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:28 AM  5/19/2006    Executing "drive sample_position 1"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:29 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:29 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:29 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:30 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:30 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:30 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:31 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:31 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:31 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:32 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:32 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:32 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:33 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:33 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:33 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:33 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:34 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:34 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:34 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:35 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:35 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:35 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:36 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:36 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:36 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:37 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:37 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:38 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:38 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:38 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:38 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:39 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:39 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:39 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:40 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:40 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:40 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:40 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:41 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:41 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:41 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:42 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:42 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:42 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:43 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:43 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:43 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:43 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:44 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:44 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:44 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:45 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:45 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:45 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:46 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:46 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:46 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:47 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:47 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:48 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:48 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:48 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:49 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:49 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:49 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:49 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:50 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:50 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:50 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:51 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:51 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:51 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:52 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:52 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:52 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:53 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:53 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:53 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:54 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:54 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:54 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:54 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:55 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:55 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:55 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:56 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:56 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:56 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:57 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:57 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:57 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:56:58 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:56:58 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:56:58 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:56:59 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:56:59 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:56:59 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:56:59 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:57:00 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:57:00 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:57:00 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:57:01 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:57:01 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:57:02 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:57:02 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:57:02 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:57:02 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:57:03 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:57:03 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:57:03 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:57:04 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:57:04 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:57:04 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:57:05 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:57:05 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:57:06 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:57:06 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:57:06 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:57:06 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:57:07 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:57:07 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:09 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:09 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:09 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:10 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:10 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:10 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:11 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:11 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:11 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:11 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:12 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:12 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:12 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:13 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:13 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:13 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:14 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:14 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:15 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:15 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:15 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:15 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:16 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:16 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:16 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:17 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:17 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:18 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:18 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:18 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:19 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:19 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:19 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:20 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:21 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:21 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:21 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:21 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:22 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:22 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:22 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:23 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:24 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:24 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:24 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:25 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:25 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:26 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:26 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:26 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:27 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:27 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:27 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:28 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:28 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:28 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:29 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:29 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:31 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:31 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:31 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:31 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:32 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:32 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:32 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:33 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:33 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:34 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:34 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:34 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:35 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:35 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:35 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:36 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:36 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:37 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:37 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:38 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:38 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:38 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:38 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:39 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:40 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:40 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:40 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:40 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:41 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:41 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:41 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:42 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:44 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:44 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:44 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:45 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:45 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:45 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:46 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:46 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:47 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:47 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:48 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:48 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:49 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:49 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:49 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:50 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:50 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:51 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:51 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:51 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:52 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:52 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:52 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:53 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:54 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:54 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:54 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:55 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:55 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:55 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:55 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:56 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:57 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



11:59:57 AM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





11:59:57 AM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





11:59:58 AM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





11:59:58 AM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





11:59:58 AM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:58 AM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





11:59:59 AM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





11:59:59 AM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



12:00:00 PM  5/19/2006    Executing "drive trap_y_150mm 96.220000"



ERROR in drive command: Attempting to move "trap_y_150mm" - this entry is not present in the device list.
..Move aborted.





12:00:00 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:00:00 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:00:01 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:00:02 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.




Abort issued!!


12:00:03 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Driving to the following position: "nguides 0 sample_det_dist 15.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 10.000000 dlambda_rel_fwhm 0.100000"



Destination Motor Positions:
motor        position
sample_det_dist      15.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      3532.12500

selector_tilt      2.29167



Drive completed.





12:00:08 PM  5/19/2006    Executing "beamcentre 5092" ... 



Command "beamcentre" not found.



12:04:08 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:04:08 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:04:08 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:04:08 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:04:09 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:04:09 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:04:09 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:04:10 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:04:10 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:04:10 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:04:10 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:04:11 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:04:11 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:04:12 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:04:12 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:04:13 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:11:39 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:11:39 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:11:39 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:11:39 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:11:40 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:11:41 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:11:41 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:11:41 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:11:41 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:11:42 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:11:42 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:11:42 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:11:42 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:11:43 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:11:43 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:11:43 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:12:11 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:12:11 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:12:11 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:12:11 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:12:12 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:12:12 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:12:12 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:12:13 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:12:13 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:12:13 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:12:14 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:12:14 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:12:14 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:12:15 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:12:15 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:12:15 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:14:28 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:14:28 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:14:28 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:14:28 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:14:29 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:14:29 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:14:29 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:14:30 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:14:30 PM  5/19/2006    Executing "drive attenuator 8"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





12:14:30 PM  5/19/2006    Executing "drive nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Driving to the following position: "nguides 0 sample_det_dist 10.000000 detector_trans 0.000000 sample_ap_trans 40.000000 lambda 6.000000 dlambda_rel_fwhm 0.000000"



Destination Motor Positions:
motor        position
sample_det_dist      10.00000

detector_trans      0.00000

sample_ap_trans      40.00000

coll_1      -5.00000

coll_2      0.00000

coll_3      0.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000

selector_rpm      Inf

selector_tilt      Inf



ERROR in drive command...
The destination for "selector_rpm", Inf, exceeds the upper limit of 9999.90000.
The destination for "selector_tilt", Inf, exceeds the upper limit of 4.00000.
..Move aborted.



Drive completed.





12:14:31 PM  5/19/2006    Executing "beamcentre 00" ... 



Command "beamcentre" not found.



12:14:31 PM  5/19/2006    Executing "drive trap_y_100mm 96.220000"



Driving to the following position: "trap_y_100mm 96.220000"



Destination Motor Positions:
motor        position
trap_y_100mm      96.22000



Drive completed.





12:14:31 PM  5/19/2006    Executing "drive beam_trap_x 96.540000"



Driving to the following position: "beam_trap_x 96.540000"



Destination Motor Positions:
motor        position
beam_trap_x      96.54000



Drive completed.





12:14:32 PM  5/19/2006    Executing "preset detector 0.000000"




Setting the default preset channel to:  detector
and the default preset value to:  0.000000





12:14:32 PM  5/19/2006    Executing "drive sample_position 0"



ERROR in drive command: Attempting to move "sample_position" - this entry is not present in the device list.
..Move aborted.





12:14:32 PM  5/19/2006    Executing "drive attenuator 0"



ERROR in drive command: Attempting to move "attenuator" - this entry is not present in the device list.
..Move aborted.





1:11:13 PM  6/14/2006    Executing "drive nguides 5"



Driving to the following position: "nguides 5"



Destination Motor Positions:
motor        position
coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      -45.00000

coll_5      -45.00000

coll_6      -5.00000

coll_7      0.00000

coll_8      0.00000



Drive completed.





1:13:01 PM  6/14/2006    Executing "initialize"

                         Derived from "init"



Reinitializing experiment ...  Completed initialization.



1:13:31 PM  6/14/2006    Executing "scan"

                         Derived from "collect"





# scan = 25

# date = 6/14/2006

# time = 1:13:31 PM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect

# builtin_command = scan

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = detector

# preset_value = 0.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1      0.000      0.000   9940.000      0.000     9.9819  3532.1204     2.2929    10.0013     0.1000     5.0000     0.0000    39.9996    10.0008    96.5394    -0.0017    -1.0000    15.0014    96.2203     0.0000     0.000

# Footer Info = Add information here

# 1:13:32 PM  6/14/2006   scan completed.



1:13:54 PM  6/14/2006    Executing "preset time 50"




Setting the default preset channel to:  time
and the default preset value to:  50.000000





1:13:56 PM  6/14/2006    Executing "scan"

                         Derived from "collect"





# scan = 26

# date = 6/14/2006

# time = 1:13:56 PM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect

# builtin_command = scan

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 50.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     50.000 250459.000 895658.000   9978.000    10.4156  3532.1204     2.2929    10.0013     0.1000     5.0000     0.0000    39.9996    10.0008    96.5394    -0.0017    -1.0000    15.0014    96.2203     0.0000     0.000

# Footer Info = Add information here

# 1:14:46 PM  6/14/2006   scan completed.



1:14:54 PM  6/14/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





1:14:55 PM  6/14/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





1:14:55 PM  6/14/2006    Executing "count preset time 100000"



1:14:55 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      132.571   663452.000  2319647.000    26447.000



1:17:09 PM  6/14/2006   Count command stopped!!




Abort issued!!


4:02:54 PM  6/14/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:02:55 PM  6/14/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:02:55 PM  6/14/2006    Executing "count preset time 100000"



4:02:55 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

      250.860  1254041.000  4531207.000    50463.000



4:07:07 PM  6/14/2006   Count command stopped!!




Abort issued!!


4:08:18 PM  6/14/2006    Executing "initialize"

                         Derived from "init"



Reinitializing experiment ...  Completed initialization.



4:08:31 PM  6/14/2006    Executing "count preset time 100000"



4:08:31 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       18.767    94067.000   358664.000     3756.000



4:08:50 PM  6/14/2006   Count command stopped!!




Abort issued!!


4:08:52 PM  6/14/2006    Executing "count preset time 100000"



4:08:52 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

        4.106    20577.000    80044.000      766.000



4:08:57 PM  6/14/2006   Count command stopped!!




Abort issued!!


4:08:59 PM  6/14/2006    Executing "initialize"

                         Derived from "init"



Reinitializing experiment ...  Completed initialization.



4:09:13 PM  6/14/2006    Executing "count preset time 100000"



4:09:13 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       12.819    64057.000   239640.000     2529.000



4:09:27 PM  6/14/2006   Count command stopped!!




Abort issued!!


4:10:26 PM  6/14/2006    Executing "count preset time 100000"



4:10:26 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       16.163    80580.000   318342.000     3185.000



4:10:43 PM  6/14/2006   Count command stopped!!




Abort issued!!


4:10:44 PM  6/14/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





4:10:45 PM  6/14/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





4:10:45 PM  6/14/2006    Executing "count preset time 100000"



4:10:45 PM  6/14/2006   Executing count command with preset channel "time" and preset value 100000.00



         time      monitor     sans_det     detector

       73.826   368729.000  1125897.000    14651.000



4:11:59 PM  6/14/2006   Count command stopped!!




Abort issued!!


2:45:39 PM  8/15/2006    Executing "drive trap_y_40mm out trap_y_100mm out trap_y_200mm out"



ERROR in drive command: The arguments for the "drive" command must be in the form of motor value pairs:
drive motor1 value1 motor2 value2 .....Move aborted.





2:45:49 PM  8/15/2006    Executing "drive attenuator_pos pos2"



Driving to the following position: "attenuator_pos pos2"



Destination Motor Positions:
motor        position
attenuator_pos      10.00000



Drive completed.





9:33:38 AM  10/2/2006    Executing "scan"

                         Derived from "collect"





# scan = 27

# date = 10/2/2006

# time = 9:33:38 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect

# builtin_command = scan

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 50.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     37.995 189721.000 686393.000   7663.000     9.7363  3532.1204     2.2929    10.0013     0.1000     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    15.0014    96.2203     0.0000     0.000

# Footer Info = Add information here

# 9:34:17 AM  10/2/2006   scan stopped!!


Abort issued!!


9:35:01 AM  10/2/2006    Executing "scan preset time 60"

                         Derived from "collect preset time 60"





# scan = 28

# date = 10/2/2006

# time = 9:35:01 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 60

# builtin_command = scan preset time 60

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 60.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1      4.267  21273.000  87933.000    848.000     9.5448  3532.1204     2.2929    10.0013     0.1000     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    15.0014    96.2203     0.0000     0.000

# Footer Info = Add information here

# 9:35:06 AM  10/2/2006   scan stopped!!


Abort issued!!


9:35:29 AM  10/2/2006    Executing "scan preset time 120"

                         Derived from "collect preset time 120"





# scan = 29

# date = 10/2/2006

# time = 9:35:29 AM

# experiment = 

# experiment_number = 1

# command = collect preset time 120

# builtin_command = scan preset time 120

# users = 

# local_contact = 

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 120.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     45.405 226165.000 881842.000   8990.000    10.4932  3532.1204     2.2929    10.0013     0.1000     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    15.0014    96.2203     0.0000     0.000

# Footer Info = Add information here

# 9:36:15 AM  10/2/2006   scan stopped!!


Abort issued!!


9:36:15 AM  10/2/2006    Executing "drive samp_det_dist 5"



ERROR in drive command: Attempting to move "samp_det_dist" - this entry is not present in the device list.
..Move aborted.





9:36:44 AM  10/2/2006    Executing "drive sample_det_dist 5"



Driving to the following position: ""



Destination Motor Positions:
motor        position
sample_det_dist      5.00000



Drive completed.





9:37:12 AM  10/2/2006    Executing "drive sample_det_dist 55"



Driving to the following position: ""



Destination Motor Positions:
motor        position
sample_det_dist      55.00000



ERROR in drive command...
The destination for "sample_det_dist", 55.00000, exceeds the upper limit of 20.00000.
..Move aborted.



Drive completed.





9:37:19 AM  10/2/2006    Executing "drive sample_det_dist 20"



Driving to the following position: ""



Destination Motor Positions:
motor        position
sample_det_dist      20.00000



Drive completed.





9:56:15 AM  10/2/2006    Executing "drive nguides 4"



Driving to the following position: ""



Destination Motor Positions:
motor        position
coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      -45.00000

coll_5      -5.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000



Drive completed.





9:57:33 AM  10/2/2006    Executing "drive nguides 5"



Driving to the following position: ""



Destination Motor Positions:
motor        position
coll_1      -45.00000

coll_2      -45.00000

coll_3      -45.00000

coll_4      -45.00000

coll_5      -45.00000

coll_6      -5.00000

coll_7      0.00000

coll_8      0.00000



Drive completed.





9:57:53 AM  10/2/2006    Executing "drive lambda 20"



Driving to the following position: ""



Destination Motor Positions:
motor        position
selector_rpm      1766.29427



Drive completed.





9:58:26 AM  10/2/2006    Executing "drive lambda_rel_fwhm 0.2"



ERROR in drive command: Attempting to move "lambda_rel_fwhm" - this entry is not present in the device list.
..Move aborted.





9:59:11 AM  10/2/2006    Executing "drive dlambda_rel_fwhm 0.2"



Driving to the following position: ""



Destination Motor Positions:
motor        position
selector_tilt      -2.39583

selector_rpm      883.02980



Drive completed.





6:00:15 AM  10/3/2006    Executing "scan preset time 120"

                         Derived from "collect preset time 120"





# scan = 30

# date = 10/3/2006

# time = 6:00:15 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 120

# builtin_command = scan preset time 120

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 120.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1      4.236  21088.000  88171.000    841.000     9.8110   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 6:00:20 AM  10/3/2006   scan stopped!!


Abort issued!!


6:00:39 AM  10/3/2006    Executing "scan preset time 120"

                         Derived from "collect preset time 120"





# scan = 31

# date = 10/3/2006

# time = 6:00:39 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 120

# builtin_command = scan preset time 120

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 120.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     56.652 284087.000 920218.000  11291.000     9.7527   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 6:01:36 AM  10/3/2006   scan stopped!!


Abort issued!!


8:32:35 PM  10/3/2006    Executing "scan preset time 10"

                         Derived from "collect preset time 10"





# scan = 32

# date = 10/3/2006

# time = 8:32:35 PM

# experiment = 

# experiment_number = 1

# command = collect preset time 10

# builtin_command = scan preset time 10

# users = 

# local_contact = 

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 10.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     10.000  50028.000 195733.000   1962.000     9.6621   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 8:32:46 PM  10/3/2006   scan completed.



8:34:01 PM  10/3/2006    Executing "scan preset time 120"

                         Derived from "collect preset time 120"





# scan = 33

# date = 10/3/2006

# time = 8:34:01 PM

# experiment = 

# experiment_number = 1

# command = collect preset time 120

# builtin_command = scan preset time 120

# users = 

# local_contact = 

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 120.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     11.336  56536.000 215509.000   2261.000    10.0609   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 8:34:13 PM  10/3/2006   scan stopped!!


Abort issued!!


9:06:51 PM  10/3/2006    Executing "scan preset time 20"

                         Derived from "collect preset time 20"





# scan = 34

# date = 10/3/2006

# time = 9:06:51 PM

# experiment = 

# experiment_number = 1

# command = collect preset time 20

# builtin_command = scan preset time 20

# users = 

# local_contact = 

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 20.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     20.000 100582.000 361937.000   3993.000    10.1498   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 9:07:11 PM  10/3/2006   scan completed.



10:52:26 PM  10/3/2006    Executing "scan preset time 25"

                          Derived from "collect preset time 25"





# scan = 35

# date = 10/3/2006

# time = 10:52:26 PM

# experiment = 

# experiment_number = 1

# command = collect preset time 25

# builtin_command = scan preset time 25

# users = 

# local_contact = 

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 25.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     25.000 125391.000 421216.000   5018.000    10.3837   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 10:52:52 PM  10/3/2006   scan completed.



6:23:17 AM  10/4/2006    Executing "scan preset time 30"

                         Derived from "collect preset time 30"





# scan = 36

# date = 10/4/2006

# time = 6:23:17 AM

# experiment = 

# experiment_number = 1

# command = collect preset time 30

# builtin_command = scan preset time 30

# users = 

# local_contact = 

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 30.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     30.000 149975.000 479477.000   6020.000    10.2284   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 6:23:48 AM  10/4/2006   scan completed.



11:20:24 AM  10/4/2006    Executing "scan preset time 30"

                          Derived from "collect preset time 30"





# scan = 37

# date = 10/4/2006

# time = 11:20:24 AM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 30

# builtin_command = scan preset time 30

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 30.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1     30.000 150625.000 480107.000   5975.000    10.1535   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 11:20:55 AM  10/4/2006   scan completed.



3:09:27 PM  10/18/2006    Executing "scan preset time 300"

                          Derived from "collect preset time 300"





# scan = 38

# date = 10/18/2006

# time = 3:09:27 PM

# experiment = Small-angle neutron scattering study of several samples

# experiment_number = 1

# command = collect preset time 300

# builtin_command = scan preset time 300

# users = M. Lumsden, M. Yethiraj, B. Hamilton, L. Robertson, W. Heller

# local_contact = me

# scan_title = Test data collection for 50 seconds

# samplename = ghkyuikyuhj

# sampletype = crystal

# preset_type = normal 

# preset_channel = time

# preset_value = 300.000000

# def_x = Pt.

# def_y = detector

# col_headers = 

#   Pt.       time    monitor   sans_det   detector     p_tank selector_rpm selector_tilt     lambda dlambda_rel_fwhm    nguides attenuation sample_ap_trans attenuator_pos beam_trap_x detector_trans beam_trap_size sample_det_dist trap_y_100mm trap_y_200mm trap_y_40mm

      1    120.003 599106.000 2097179.000  23818.000    10.0926   883.0350    -2.3944    20.0059     0.1999     0.0000     0.0000    39.9996    10.0003    96.5394    -0.0017    -1.0000    20.0013    96.2203     0.0000     0.000

# Footer Info = Add information here

# 3:11:28 PM  10/18/2006   scan stopped!!


Abort issued!!


3:11:54 PM  10/18/2006    Executing "drive nguides 2"



Driving to the following position: ""



Destination Motor Positions:
motor        position
coll_1      -45.00000

coll_2      -45.00000

coll_3      -5.00000

coll_4      0.00000

coll_5      0.00000

coll_6      0.00000

coll_7      0.00000

coll_8      0.00000



Drive completed.



